Lawrence K. Wang, Norman C. Pereira, Yung-Tse Hung
A panel of respected air pollution control educators and practicing professionals critically survey the both principles and practices underlying control processes, and illustrate these with a host of detailed design examples for practicing engineers. The authors discuss the performance, potential, and limitations of the major control processes-including fabric filtration, cyclones, electrostatic precipitation, wet and dry scrubbing, and condensation-as a basis for intelligent planning of abatement systems,. Additional chapters critically examine flare processes, thermal oxidation, catalytic oxidation, gas-phase activated carbon adsorption, and gas-phase biofiltration. The contributors detail the Best Available Technologies (BAT) for air pollution control and provide cost data, examples, theoretical explanations, and engineering methods for the design, installation, and operation of air pollution process equipment. Methods of practical design calculation are illustrated by numerous numerical calculations.
Preface
The past 30 years have seen the emergence of a growing desire worldwide to
take positive actions to restore and protect the environment from the degrad-
ing effects of all forms of pollution: air, noise, solid waste, and water. Because
pollution is a direct or indirect consequence of waste, the seemingly idealistic
goal for “zero discharge” can be construed as an unrealistic demand for zero
waste. However, as long as waste exists, we can only attempt to abate the sub-
sequent pollution by converting it to a less noxious form. Three major ques-
tions usually arise when a particular type of pollution has been identified:
(1) How serious is the pollution? (2) Is the technology to abate it available? and
(3) Do the costs of abatement justify the degree of abatement achieved? The
principal intention of the Handbook of Environmental Engineering series is to help
readers formulate answers to the last two questions.
The traditional approach of applying tried-and-true solutions to specific pol-
lution problems has been a major contributing factor to the success of environ-
mental engineering, and has accounted in large measure for the establishment of
a “methodology of pollution control.” However, realization of the ever-increas-
ing complexity and interrelated nature of current environmental problems ren-
ders it imperative that intelligent planning of pollution abatement systems be
undertaken. Prerequisite to such planning is an understanding of the perfor-
mance, potential, and limitations of the various methods of pollution abatement
available for environmental engineering. In this series of handbooks, we will
review at a tutorial level a broad spectrum of engineering systems (processes,
operations, and methods) currently being utilized, or of potential utility, for pol-
lution abatement. We believe that the unified interdisciplinary approach in these
handbooks is a logical step in the evolution of environmental engineering.
The treatment of the various engineering systems presented in Air Pollution
Control Engineering will show how an engineering formulation of the subject
flows naturally from the fundamental principles and theory of chemistry, phys-
ics, and mathematics. This emphasis on fundamental science recognizes that
engineering practice has in recent years become more firmly based on scien-
tific principles rather than its earlier dependency on empirical accumulation of
facts. It is not intended, though, to neglect empiricism when such data lead
quickly to the most economic design; certain engineering systems are not
readily amenable to fundamental scientific analysis, and in these instances we
have resorted to less science in favor of more art and empiricism.
Because an environmental engineer must understand science within the con-
text of application, we first present the development of the scientific basis of a
particular subject, followed by exposition of the pertinent design concepts and
operations, and detailed explanations of their applications to environmental
quality control or improvement. Throughout the series, methods of practical
design calculation are illustrated by numerical examples. These examples clearly
demonstrate how organized, analytical reasoning leads to the most direct and
clear solutions. Wherever possible, pertinent cost data have been provided.
Our treatment of pollution-abatement engineering is offered in the belief that
the trained engineer should more firmly understand fundamental principles, be
more aware of the similarities and/or differences among many of the engineering
systems, and exhibit greater flexibility and originality in the definition and innova-
tive solution of environmental pollution problems. In short, the environmental
engineers should by conviction and practice be more readily adaptable to change
and progress.
Coverage of the unusually broad field of environmental engineering has
demanded an expertise that could only be provided through multiple
authorships. Each author (or group of authors) was permitted to employ,
within reasonable limits, the customary personal style in organizing and pre-
senting a particular subject area, and, consequently, it has been difficult to
treat all subject material in a homogeneous manner. Moreover, owing to limi-
tations of space, some of the authors’ favored topics could not be treated in
great detail, and many less important topics had to be merely mentioned or
commented on briefly. All of the authors have provided an excellent list of
references at the end of each chapter for the benefit of the interested reader.
Because each of the chapters is meant to be self-contained, some mild repeti-
tion among the various texts is unavoidable. In each case, all errors of omis-
sion or repetition are the responsibility of the editors and not the individual
authors. With the current trend toward metrication, the question of using a
consistent system of units has been a problem. Wherever possible the authors
have used the British system (fps) along with the metric equivalent (mks, cgs,
or SIU) or vice versa. The authors sincerely hope that this doubled system of
unit notation will prove helpful rather than disruptive to the readers.
The goals of the Handbook of Environmental Engineering series are (1) to cover
the entire range of environmental fields, including air and noise pollution con-
trol, solid waste processing and resource recovery, biological treatment pro-
cesses, water resources, natural control processes, radioactive waste disposal,
thermal pollution control, and physicochemical treatment processes; and (2) to
employ a multithematic approach to environmental pollution control since air,
water, land, and energy are all interrelated. No consideration is given to pollu-
tion by type of industry or to the abatement of specific pollutants. Rather, the
organization of the series is based on the three basic forms in which pollutants
and waste are manifested: gas, solid, and liquid. In addition, noise pollution
control is included in one of the handbooks in the series.
This volume of Air Pollution Control Engineering, a companion to the volume,
Advanced Air and Noise Pollution Control, has been designed to serve as a basic
air pollution control design textbook as well as a comprehensive reference
book. We hope and expect it will prove of equally high value to advanced
undergraduate or graduate students, to designers of air pollution abatement
systems, and to scientists and researchers. The editors welcome comments from
readers in the field. It is our hope that this book will not only provide informa-tion on the air pollution abatement technologies, but will also serve as a basis
for advanced study or specialized investigation of the theory and practice of
the unit operations and unit processes covered.
The editors are pleased to acknowledge the encouragement and support
received from their colleagues and the publisher during the conceptual stages
of this endeavor. We wish to thank the contributing authors for their time and
effort, and for having patiently borne our reviews and numerous queries and
comments. We are very grateful to our respective families for their patience
and understanding during some rather trying times.
The editors are especially indebted to Dr. Howard E. Hesketh at Southern
Illinois University, Carbondale, Illinois, and Ms. Kathleen Hung Li at NEC
Business Network Solutions, Irving, Texas, for their services as Consulting
Editors of the first and second editions, respectively.
Lawrence K. Wang
Norman C. Pereira
Yung-Tse Hung
Link tải:
A panel of respected air pollution control educators and practicing professionals critically survey the both principles and practices underlying control processes, and illustrate these with a host of detailed design examples for practicing engineers. The authors discuss the performance, potential, and limitations of the major control processes-including fabric filtration, cyclones, electrostatic precipitation, wet and dry scrubbing, and condensation-as a basis for intelligent planning of abatement systems,. Additional chapters critically examine flare processes, thermal oxidation, catalytic oxidation, gas-phase activated carbon adsorption, and gas-phase biofiltration. The contributors detail the Best Available Technologies (BAT) for air pollution control and provide cost data, examples, theoretical explanations, and engineering methods for the design, installation, and operation of air pollution process equipment. Methods of practical design calculation are illustrated by numerous numerical calculations.
Preface
The past 30 years have seen the emergence of a growing desire worldwide to
take positive actions to restore and protect the environment from the degrad-
ing effects of all forms of pollution: air, noise, solid waste, and water. Because
pollution is a direct or indirect consequence of waste, the seemingly idealistic
goal for “zero discharge” can be construed as an unrealistic demand for zero
waste. However, as long as waste exists, we can only attempt to abate the sub-
sequent pollution by converting it to a less noxious form. Three major ques-
tions usually arise when a particular type of pollution has been identified:
(1) How serious is the pollution? (2) Is the technology to abate it available? and
(3) Do the costs of abatement justify the degree of abatement achieved? The
principal intention of the Handbook of Environmental Engineering series is to help
readers formulate answers to the last two questions.
The traditional approach of applying tried-and-true solutions to specific pol-
lution problems has been a major contributing factor to the success of environ-
mental engineering, and has accounted in large measure for the establishment of
a “methodology of pollution control.” However, realization of the ever-increas-
ing complexity and interrelated nature of current environmental problems ren-
ders it imperative that intelligent planning of pollution abatement systems be
undertaken. Prerequisite to such planning is an understanding of the perfor-
mance, potential, and limitations of the various methods of pollution abatement
available for environmental engineering. In this series of handbooks, we will
review at a tutorial level a broad spectrum of engineering systems (processes,
operations, and methods) currently being utilized, or of potential utility, for pol-
lution abatement. We believe that the unified interdisciplinary approach in these
handbooks is a logical step in the evolution of environmental engineering.
The treatment of the various engineering systems presented in Air Pollution
Control Engineering will show how an engineering formulation of the subject
flows naturally from the fundamental principles and theory of chemistry, phys-
ics, and mathematics. This emphasis on fundamental science recognizes that
engineering practice has in recent years become more firmly based on scien-
tific principles rather than its earlier dependency on empirical accumulation of
facts. It is not intended, though, to neglect empiricism when such data lead
quickly to the most economic design; certain engineering systems are not
readily amenable to fundamental scientific analysis, and in these instances we
have resorted to less science in favor of more art and empiricism.
Because an environmental engineer must understand science within the con-
text of application, we first present the development of the scientific basis of a
particular subject, followed by exposition of the pertinent design concepts and
operations, and detailed explanations of their applications to environmental
quality control or improvement. Throughout the series, methods of practical
design calculation are illustrated by numerical examples. These examples clearly
demonstrate how organized, analytical reasoning leads to the most direct and
clear solutions. Wherever possible, pertinent cost data have been provided.
Our treatment of pollution-abatement engineering is offered in the belief that
the trained engineer should more firmly understand fundamental principles, be
more aware of the similarities and/or differences among many of the engineering
systems, and exhibit greater flexibility and originality in the definition and innova-
tive solution of environmental pollution problems. In short, the environmental
engineers should by conviction and practice be more readily adaptable to change
and progress.
Coverage of the unusually broad field of environmental engineering has
demanded an expertise that could only be provided through multiple
authorships. Each author (or group of authors) was permitted to employ,
within reasonable limits, the customary personal style in organizing and pre-
senting a particular subject area, and, consequently, it has been difficult to
treat all subject material in a homogeneous manner. Moreover, owing to limi-
tations of space, some of the authors’ favored topics could not be treated in
great detail, and many less important topics had to be merely mentioned or
commented on briefly. All of the authors have provided an excellent list of
references at the end of each chapter for the benefit of the interested reader.
Because each of the chapters is meant to be self-contained, some mild repeti-
tion among the various texts is unavoidable. In each case, all errors of omis-
sion or repetition are the responsibility of the editors and not the individual
authors. With the current trend toward metrication, the question of using a
consistent system of units has been a problem. Wherever possible the authors
have used the British system (fps) along with the metric equivalent (mks, cgs,
or SIU) or vice versa. The authors sincerely hope that this doubled system of
unit notation will prove helpful rather than disruptive to the readers.
The goals of the Handbook of Environmental Engineering series are (1) to cover
the entire range of environmental fields, including air and noise pollution con-
trol, solid waste processing and resource recovery, biological treatment pro-
cesses, water resources, natural control processes, radioactive waste disposal,
thermal pollution control, and physicochemical treatment processes; and (2) to
employ a multithematic approach to environmental pollution control since air,
water, land, and energy are all interrelated. No consideration is given to pollu-
tion by type of industry or to the abatement of specific pollutants. Rather, the
organization of the series is based on the three basic forms in which pollutants
and waste are manifested: gas, solid, and liquid. In addition, noise pollution
control is included in one of the handbooks in the series.
This volume of Air Pollution Control Engineering, a companion to the volume,
Advanced Air and Noise Pollution Control, has been designed to serve as a basic
air pollution control design textbook as well as a comprehensive reference
book. We hope and expect it will prove of equally high value to advanced
undergraduate or graduate students, to designers of air pollution abatement
systems, and to scientists and researchers. The editors welcome comments from
readers in the field. It is our hope that this book will not only provide informa-tion on the air pollution abatement technologies, but will also serve as a basis
for advanced study or specialized investigation of the theory and practice of
the unit operations and unit processes covered.
The editors are pleased to acknowledge the encouragement and support
received from their colleagues and the publisher during the conceptual stages
of this endeavor. We wish to thank the contributing authors for their time and
effort, and for having patiently borne our reviews and numerous queries and
comments. We are very grateful to our respective families for their patience
and understanding during some rather trying times.
The editors are especially indebted to Dr. Howard E. Hesketh at Southern
Illinois University, Carbondale, Illinois, and Ms. Kathleen Hung Li at NEC
Business Network Solutions, Irving, Texas, for their services as Consulting
Editors of the first and second editions, respectively.
Lawrence K. Wang
Norman C. Pereira
Yung-Tse Hung
Link tải:
You must be registered for see links