format không được bạn ơi, nó ghi là this disk is writed protected Bạn dùng HP USB Disk Storage Format Tool, nếu hông dc thì làm như sau (cái này mình sưu tầm dc trên mạng):
Cách 1
1. Mở Command prompt bằng cách mở nút Start,đánh Command Prompt.
Nó sẽ ra một cửa sổ nền đen.
2. Gõ diskpart rồi Enter.
3. Đánh list volume rồi Enter.
Nó sẽ hiện ra list volume theo tên ổ cứng trong máy, xem ổ cần chữa là volume mấy? VD ổ G là volume 3
4. Gõ select volume 3 (số volume tương ứng với ổ bạn bị lỗi "write-protected',xem ở list volume trên) rồi Enter.
5. Gõ attributes disk clear readonly , và Enter.
6. Cuối cùng gõ exit,rồi Enter.
Xong rồi đấy, giờ bạn vào ổ bị "Write-protected" refresh lại, vào kiểm tra.
Chúc may mắn!!! mình làm xong, vui quá vì giữ được bao nhiêu phim hay trong ổ.
Cách 2:
Start | All Programs | Accessories | Command Prompt
At the flashing cursor type the following:
diskpart (hit )
Now select the external disk
Now type the following
Attributes volume clear readonly (hit )
Exit
Cách 3:
Step 1
Click Start. Type "cmd" into the search box. Press "Enter" to load the Command Prompt.
Step 2
Type:
diskpart
into the command-line program and then press "Enter" to run DiskPart.
Step 3
Execute the following command to see the list of available volumes on the PC:
list disk
Step 4
Type:
select disk <#>
and replace "<#>" with the number assigned to the target hard drive. Press "Enter."
Step 5
Execute the following command to turn off write-protection:
attributes disk clear readonly
Close Command Prompt when the process completes.