Cho e hỏi tý e đag tập làm đĩa cd boot để phục vụ cho cv gồm norton ghost + file GHOST = ~700MB ...... e test emution success nhưng ghi xong thì báo "bad sector và đường dẫn tới file GHOST" ...... log file ra thì nó báo thế này :
9X03-0154-4H84-WWPL-1WPZ-AP64-****-****
Windows 7 6.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 10.0.10.100
Internal Version: 10,0,10,100
Recorder:Version: 1.00 - HA 1 TA 0 - 10.0.10.100
Adapter driver: HA 1
Drive buffer : 1536kB
Bus Type : via Inquiry data
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM:Version: 3.5Z - HA 1 TA 1 - 10.0.10.100
Adapter driver: HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : VUDGX PEV4HAJ4PAR 3.5Z axiwh4fs Port 2 ID 0 DMA: Off
CdRomPeripheral : VUDGX PEV4HAJ4PAR 3.5Z axiwh4fs Port 2 ID 1 DMA: Off
=== CDRom-Device-Map ===
PIONEER DVD-RW DVRTD10RS F: CdRom0
VUDGX PEV4HAJ4PAR G: CdRom1
VUDGX PEV4HAJ4PAR H: CdRom2
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1782MB (1825600kB)
Free physical memory: 1227MB (1256448kB)
Memory in use : 31 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0)
15.11.2011
CD-ROM (Boot)
2:06:06 PM #1 Text 0 File SCSIPTICommands.cpp, Line 464
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
2:06:07 PM #2 Text 0 File Isodoc.cpp, Line 6956
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : FALSE
2:06:07 PM #3 Text 0 File Burncd.cpp, Line 3238
PIONEER DVD-RW DVRTD10RS
Buffer underrun protection activated
2:06:07 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3336
First writeable address = 0 (0x00000000)
2:06:07 PM #5 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using CD-R/RW media
2:06:07 PM #6 Text 0 File DlgWaitCD.cpp, Line 314
[F: DVD-RW DVRTD10RS] Last possible write address on media: 359846
Last address to be written: 353359
2:06:07 PM #7 Text 0 File DlgWaitCD.cpp, Line 326
[F: DVD-RW DVRTD10RS] Write in overburning mode: NO (enabled: CD)
2:06:07 PM #8 Text 0 File DlgWaitCD.cpp, Line 2890
Recorder: PIONEER DVD-RW DVRTD10RS;
CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd.
ATIP Data:
Special Info [hex] 1: C0 00 80, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
2:06:07 PM #9 Text 0 File DlgWaitCD.cpp, Line 499
[F: DVD-RW DVRTD10RS] >>> Protocol of DlgWaitCD activities: <<<
=========================================
2:06:07 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 353360 (353360) = #353360/78:31.35
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 353360 blocks [F: PIONEER DVD-RW DVRTD10RS]
--------------------------------------------------------------
2:06:07 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1001
Prepare [F: PIONEER DVD-RW DVRTD10RS] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 723988480, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|__ ____NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 353360 | 0 | 0x00
353360 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
MediaType: CD-R
2:06:07 PM #12 Text 0 File SCSIPTICommands.cpp, Line 251
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
2:06:07 PM #13 Text 0 File Burncd.cpp, Line 4278
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
2:06:07 PM #14 PHASE 24 File dlgbrnst.cpp, Line 1827
Unknown BurnPhase
2:06:07 PM #15 Text 0 File Burncd.cpp, Line 4400
Cache autograph successful.
2:06:07 PM #16 PHASE 25 File dlgbrnst.cpp, Line 1827
Unknown BurnPhase
2:06:07 PM #17 PHASE 32 File dlgbrnst.cpp, Line 1827
Unknown BurnPhase
2:06:09 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2769
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:06:09 PM #19 Text 0 File MMC.cpp, Line 17645
StartDAO : CD-Text - Off
2:06:09 PM #20 Text 0 File MMC.cpp, Line 21660
Set BUFE: Buffer underrun protection -> ON
2:06:09 PM #21 Text 0 File MMC.cpp, Line 17873
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 4e 21 23
2:06:09 PM #22 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800
2:12:20 PM #23 Text 0 File WriterStatus.cpp, Line 244
start autograph Lead-Out at LBA 353360 (56450h), length 0 blocks
2:12:37 PM #24 SPTI -1169 File SCSIPassThrough.cpp, Line 217
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08
Buffer x0446c280: Len x20
2:12:39 PM #25 Text 0 File DVDPlusDualLayer.cpp, Line 1460
SetDriveCaps: Set LAST LBA of layer 1 to 0
2:12:39 PM #26 PHASE 33 File dlgbrnst.cpp, Line 1827
Unknown BurnPhase
2:12:39 PM #27 PHASE 36 File dlgbrnst.cpp, Line 1827
Unknown BurnPhase
2:12:39 PM #28 Text 0 File ThreadedTransferInterface.cpp, Line 2769
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:12:39 PM #29 Text 0 File MMC.cpp, Line 17645
StartDAO : CD-Text - Off
2:12:39 PM #30 Text 0 File MMC.cpp, Line 21660
Set BUFE: Buffer underrun protection -> ON
2:12:39 PM #31 Text 0 File MMC.cpp, Line 17873
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 4e 21 23
2:12:39 PM #32 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800
2:18:53 PM #33 Text 0 File WriterStatus.cpp, Line 244
start autograph Lead-Out at LBA 353360 (56450h), length 0 blocks
2:19:09 PM #34 SPTI -1169 File SCSIPassThrough.cpp, Line 217
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08
Buffer x0446c280: Len x20
2:19:17 PM #35 Text 0 File DVDPlusDualLayer.cpp, Line 1460
SetDriveCaps: Set LAST LBA of layer 1 to 0
2:19:17 PM #36 PHASE 37 File dlgbrnst.cpp, Line 1827
Unknown BurnPhase
2:19:17 PM #37 PHASE 78 File dlgbrnst.cpp, Line 1827
Unknown BurnPhase
2:19:20 PM #38 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 590400
2:21:27 PM #39 SPTI -1128 File SCSIPassThrough.cpp, Line 217
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
CDB Data: 0x28 00 00 01 B6 DF 00 00 01 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 11 05
Buffer x0a791d40: Len x800
2:21:39 PM #40 SPTI -1128 File SCSIPassThrough.cpp, Line 217
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
CDB Data: 0x28 00 00 01 B6 E0 00 00 01 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 11 05
Buffer x0a791d40: Len x800
2:21:39 PM #41 SectorVerify 20 File Cdrdrv.cpp, Line 11850
Unknown CDR error
E:\Setup\ghost xp3\XPSP2.gho
2:33:49 PM #42 TRANSFER -50 File ThreadedTransfer.cpp, Line 1222
2:33:49 PM #43 PHASE 81 File dlgbrnst.cpp, Line 1827
Unknown BurnPhase
2:33:49 PM #44 Text 0 File SCSIPTICommands.cpp, Line 301
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
2:33:49 PM #45 Text 0 File Cdrdrv.cpp, Line 11916
DriveLocker: UnLockVolume completed
2:33:49 PM #46 Text 0 File SCSIPTICommands.cpp, Line 464
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
9X03-0154-4H84-WWPL-1WPZ-AP64-****-****
Windows 7 6.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 10.0.10.100
Internal Version: 10,0,10,100
Recorder:
Adapter driver:
Drive buffer : 1536kB
Bus Type : via Inquiry data
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM:
Adapter driver:
=== Scsi-Device-Map ===
CdRomPeripheral : VUDGX PEV4HAJ4PAR 3.5Z axiwh4fs Port 2 ID 0 DMA: Off
CdRomPeripheral : VUDGX PEV4HAJ4PAR 3.5Z axiwh4fs Port 2 ID 1 DMA: Off
=== CDRom-Device-Map ===
PIONEER DVD-RW DVRTD10RS F: CdRom0
VUDGX PEV4HAJ4PAR G: CdRom1
VUDGX PEV4HAJ4PAR H: CdRom2
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1782MB (1825600kB)
Free physical memory: 1227MB (1256448kB)
Memory in use : 31 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0)
15.11.2011
CD-ROM (Boot)
2:06:06 PM #1 Text 0 File SCSIPTICommands.cpp, Line 464
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
2:06:07 PM #2 Text 0 File Isodoc.cpp, Line 6956
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : FALSE
2:06:07 PM #3 Text 0 File Burncd.cpp, Line 3238
PIONEER DVD-RW DVRTD10RS
Buffer underrun protection activated
2:06:07 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3336
First writeable address = 0 (0x00000000)
2:06:07 PM #5 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using CD-R/RW media
2:06:07 PM #6 Text 0 File DlgWaitCD.cpp, Line 314
[F: DVD-RW DVRTD10RS] Last possible write address on media: 359846
Last address to be written: 353359
2:06:07 PM #7 Text 0 File DlgWaitCD.cpp, Line 326
[F: DVD-RW DVRTD10RS] Write in overburning mode: NO (enabled: CD)
2:06:07 PM #8 Text 0 File DlgWaitCD.cpp, Line 2890
Recorder: PIONEER DVD-RW DVRTD10RS;
CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd.
ATIP Data:
Special Info [hex] 1: C0 00 80, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
2:06:07 PM #9 Text 0 File DlgWaitCD.cpp, Line 499
[F: DVD-RW DVRTD10RS] >>> Protocol of DlgWaitCD activities: <<<
=========================================
2:06:07 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 353360 (353360) = #353360/78:31.35
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 353360 blocks [F: PIONEER DVD-RW DVRTD10RS]
--------------------------------------------------------------
2:06:07 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1001
Prepare [F: PIONEER DVD-RW DVRTD10RS] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 723988480, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|__ ____NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 353360 | 0 | 0x00
353360 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
MediaType: CD-R
2:06:07 PM #12 Text 0 File SCSIPTICommands.cpp, Line 251
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
2:06:07 PM #13 Text 0 File Burncd.cpp, Line 4278
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
2:06:07 PM #14 PHASE 24 File dlgbrnst.cpp, Line 1827
Unknown BurnPhase
2:06:07 PM #15 Text 0 File Burncd.cpp, Line 4400
Cache autograph successful.
2:06:07 PM #16 PHASE 25 File dlgbrnst.cpp, Line 1827
Unknown BurnPhase
2:06:07 PM #17 PHASE 32 File dlgbrnst.cpp, Line 1827
Unknown BurnPhase
2:06:09 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2769
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:06:09 PM #19 Text 0 File MMC.cpp, Line 17645
StartDAO : CD-Text - Off
2:06:09 PM #20 Text 0 File MMC.cpp, Line 21660
Set BUFE: Buffer underrun protection -> ON
2:06:09 PM #21 Text 0 File MMC.cpp, Line 17873
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 4e 21 23
2:06:09 PM #22 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800
2:12:20 PM #23 Text 0 File WriterStatus.cpp, Line 244
2:12:37 PM #24 SPTI -1169 File SCSIPassThrough.cpp, Line 217
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08
Buffer x0446c280: Len x20
2:12:39 PM #25 Text 0 File DVDPlusDualLayer.cpp, Line 1460
SetDriveCaps: Set LAST LBA of layer 1 to 0
2:12:39 PM #26 PHASE 33 File dlgbrnst.cpp, Line 1827
Unknown BurnPhase
2:12:39 PM #27 PHASE 36 File dlgbrnst.cpp, Line 1827
Unknown BurnPhase
2:12:39 PM #28 Text 0 File ThreadedTransferInterface.cpp, Line 2769
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:12:39 PM #29 Text 0 File MMC.cpp, Line 17645
StartDAO : CD-Text - Off
2:12:39 PM #30 Text 0 File MMC.cpp, Line 21660
Set BUFE: Buffer underrun protection -> ON
2:12:39 PM #31 Text 0 File MMC.cpp, Line 17873
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 4e 21 23
2:12:39 PM #32 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800
2:18:53 PM #33 Text 0 File WriterStatus.cpp, Line 244
2:19:09 PM #34 SPTI -1169 File SCSIPassThrough.cpp, Line 217
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08
Buffer x0446c280: Len x20
2:19:17 PM #35 Text 0 File DVDPlusDualLayer.cpp, Line 1460
SetDriveCaps: Set LAST LBA of layer 1 to 0
2:19:17 PM #36 PHASE 37 File dlgbrnst.cpp, Line 1827
Unknown BurnPhase
2:19:17 PM #37 PHASE 78 File dlgbrnst.cpp, Line 1827
Unknown BurnPhase
2:19:20 PM #38 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 590400
2:21:27 PM #39 SPTI -1128 File SCSIPassThrough.cpp, Line 217
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
CDB Data: 0x28 00 00 01 B6 DF 00 00 01 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 11 05
Buffer x0a791d40: Len x800
2:21:39 PM #40 SPTI -1128 File SCSIPassThrough.cpp, Line 217
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
CDB Data: 0x28 00 00 01 B6 E0 00 00 01 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 11 05
Buffer x0a791d40: Len x800
2:21:39 PM #41 SectorVerify 20 File Cdrdrv.cpp, Line 11850
Unknown CDR error
E:\Setup\ghost xp3\XPSP2.gho
2:33:49 PM #42 TRANSFER -50 File ThreadedTransfer.cpp, Line 1222
2:33:49 PM #43 PHASE 81 File dlgbrnst.cpp, Line 1827
Unknown BurnPhase
2:33:49 PM #44 Text 0 File SCSIPTICommands.cpp, Line 301
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
2:33:49 PM #45 Text 0 File Cdrdrv.cpp, Line 11916
DriveLocker: UnLockVolume completed
2:33:49 PM #46 Text 0 File SCSIPTICommands.cpp, Line 464
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon